No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other fabricated asbestos fibers; mixtures based on asbstos or on asbestos and magnesium carbonate
NSN 5960-01-003-8480
NSN 5905-01-227-5304
NSN 6110-01-144-5970
NSN 5935-01-434-5607
NSN 4140-01-631-5059
NSN 5935-01-578-8827
NSN 7035-01-651-4199
NSN 5915-01-259-5705
NSN 4140-01-429-3080
NSN 5855-01-457-7715
NSN 5855-01-096-0872
NSN 6105-01-487-3686