No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Cotters, cotter-pins, washers and similar articles, of aluminum
NSN 6145-01-147-4968
NSN 5985-01-291-0511
NSN 5999-00-279-9282
NSN 5935-01-406-3456
NSN 5935-01-233-1249
NSN 6240-01-268-2223
NSN 6685-00-227-6750
NSN 5960-01-388-1988
NSN 5925-00-846-3999
NSN 5999-01-401-5322
NSN 6220-00-741-1002
NSN 5960-01-061-1774