Tan semigloss
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5925-00-706-9975
NSN 5920-01-032-4756
NSN 5965-00-372-2537
NSN 5915-00-477-9962
NSN 5965-01-369-4101
NSN 6135-01-278-9717
NSN 6130-01-118-5917
NSN 5985-01-278-3476
NSN 6685-00-334-0621
NSN 6105-00-186-6510
NSN 5999-01-012-2449
NSN 5950-01-485-2595