No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-202-8907
NSN 2925-00-005-1618
NSN 6650-01-301-3310
NSN 6135-01-413-4747
NSN 6130-01-249-0795
NSN 6610-01-386-4582
NSN 7035-01-265-2301
NSN 5990-01-539-4653
NSN 6150-00-234-6475
NSN 5935-00-879-4962
NSN 6685-00-283-2282
NSN 5895-01-522-1411