No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5935-01-403-2844
NSN 6320-01-029-4220
NSN 5915-00-141-0410
NSN 5985-01-011-1265
NSN 6220-01-190-6307
NSN 5965-00-836-2690
NSN 4140-01-406-3292
NSN 5996-00-153-9055
NSN 5925-01-085-1981
NSN 6105-01-478-8288
NSN 6135-00-777-5562
NSN 6320-00-593-0379