No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 5910-00-099-9998
NSN 6650-01-090-8576
NSN 5990-01-588-3999
NSN 5985-01-469-3368
NSN 5920-00-116-9368
NSN 5996-00-651-1656
NSN 6650-01-642-7911
NSN 5996-00-174-8480
NSN 6110-01-253-1359
NSN 6650-00-834-9062
NSN 7035-01-026-1171
NSN 2925-01-043-9786