A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of leather or composition leather, nesoi
NSN 5965-00-372-2537
NSN 5910-01-648-2045
NSN 5960-01-029-9186
NSN 6650-00-111-3399
NSN 5930-00-200-9326
NSN 6645-01-621-8564
NSN 5905-01-118-3235
NSN 6320-00-521-9350
NSN 5960-01-553-4557
NSN 6105-00-279-3044
NSN 5996-01-023-8370
NSN 7035-01-010-8309