No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 2925-00-912-3993
NSN 5975-00-583-8625
NSN 5935-00-355-5362
NSN 5925-00-113-5066
NSN 6135-01-186-4010
NSN 5998-01-646-3073
NSN 5999-00-895-6649
NSN 6320-01-339-8056
NSN 6620-01-648-1594
NSN 5990-00-160-1176
NSN 5965-01-196-1526
NSN 5925-00-182-7452