No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6685-01-517-0589
NSN 5895-00-785-4815
NSN 5945-00-341-0558
NSN 5945-00-170-5885
NSN 6145-01-643-5536
NSN 4140-01-100-4652
NSN 6645-01-063-8243
NSN 5915-00-930-5322
NSN 5855-00-482-9876
NSN 5915-00-291-3736
NSN 6150-00-448-2357
NSN 5835-01-185-1102