Cam has two lobes, each beginning from a radius of 0.875 in to a peak radius of 1.000 in, from 297.0 degrees through 7.0 degrees for a total of 70.0 degrees duration of the first lobe, and 144.0 degrees through 247.0 degrees for a total of 103.0 degrees duration for the second lobe; 1.000 in opening through center; three 0.173 in diameter holes with 0.375 in by 0.070 in deep counterbore are spaced equal distance around surface of 1.500 in diameter hub; three more holes, 0.128 in diameter by 0.090 in deep are located on face of first lobe, centered on a 1.250 in circle, the first two holes are positioned at 45.0 degrees angles to the left and right of 0.0 degrees with the third hole located at 180.0 deg
No other part numbers with same form, fit, and function found.
An irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a camshaft (as modified).
Classification: Camshafts and crankshafts, nesoi
NSN 5945-01-047-7089
NSN 5925-01-532-8894
NSN 5835-01-307-2009
NSN 5905-01-287-3819
NSN 6110-00-111-2761
NSN 5990-01-099-8574
NSN 7035-01-628-7988
NSN 5935-01-268-5944
NSN 5915-01-551-2175
NSN 5855-00-337-3679
NSN 6145-01-186-7734
NSN 5999-01-104-4591