No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6130-01-198-7084
NSN 5998-00-227-6905
NSN 5990-00-164-1198
NSN 5835-00-130-6404
NSN 6105-00-132-1570
NSN 6105-00-235-7982
NSN 6220-00-937-1321
NSN 5945-00-635-7263
NSN 6150-00-467-5808
NSN 5925-00-498-8340
NSN 7035-01-097-8704
NSN 2925-01-076-5219