For use on irrigator, surgical; mdl. 203-150 orthotec
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5895-01-541-0134
NSN 7035-00-153-3826
NSN 5905-00-312-4122
NSN 5895-01-142-5765
NSN 6650-01-507-8615
NSN 5945-00-758-1969
NSN 5999-00-278-5563
NSN 6145-00-925-0767
NSN 5945-01-508-4652
NSN 4140-00-168-1920
NSN 5975-00-690-3159
NSN 5925-01-623-1701