No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6650-00-279-5741
NSN 6105-01-097-7413
NSN 5960-01-351-5074
NSN 5945-01-515-7814
NSN 6620-00-246-6448
NSN 5920-01-573-9782
NSN 4140-01-364-1104
NSN 2925-00-523-0322
NSN 5930-00-060-4694
NSN 5985-01-347-7044
NSN 5996-01-579-1971
NSN 5960-00-145-9361