No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6610-00-155-1334
NSN 6110-00-244-1209
NSN 5950-01-449-9118
NSN 6645-01-040-5233
NSN 6145-01-576-7738
NSN 6110-01-539-9076
NSN 6150-01-053-5543
NSN 6610-01-364-0294
NSN 5920-01-303-5951
NSN 5996-01-212-9078
NSN 5855-01-444-4859
NSN 5996-01-330-2716