Two holes, 0.126 in. Min diameter to 0.129 in. Max dia, one on each side in the center along the width
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 6645-01-490-5948
NSN 6610-01-042-8621
NSN 5996-01-460-5438
NSN 6320-00-809-5744
NSN 5930-00-967-4344
NSN 5925-01-590-1375
NSN 5915-01-528-8298
NSN 6685-00-143-7281
NSN 5999-01-460-1682
NSN 6685-00-329-7010
NSN 5965-01-430-4654
NSN 6130-01-534-8118