Two holes, 0.126 in. Min diameter to 0.129 in. Max dia, one on each side in the center along the width
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6110-01-570-2556
NSN 5999-00-393-2811
NSN 5915-01-205-7498
NSN 6320-01-547-2743
NSN 5925-00-081-9135
NSN 6240-00-635-9953
NSN 5999-00-453-2507
NSN 6620-00-441-5252
NSN 5895-00-929-0883
NSN 5930-01-303-4085
NSN 4140-00-241-0065
NSN 5930-01-214-9613