Material is: polytetrafluoroethylene 20% and carbon 5%
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5998-01-250-1290
NSN 5996-00-510-6410
NSN 5996-01-145-4357
NSN 6130-01-297-4396
NSN 5996-01-108-4306
NSN 5950-01-050-6693
NSN 6150-01-355-0042
NSN 6645-01-062-0905
NSN 6110-01-015-7608
NSN 5935-00-554-0244
NSN 6650-00-021-9555
NSN 6110-00-932-7099