No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5985-01-578-5515
NSN 6150-01-535-6181
NSN 5905-01-167-9015
NSN 5925-01-463-8594
NSN 6130-00-339-2856
NSN 6620-01-600-0479
NSN 5905-01-487-4374
NSN 6220-00-970-3797
NSN 2925-01-358-8346
NSN 6620-01-641-4122
NSN 5915-01-386-3614
NSN 5935-00-227-9767