Galvanized washer
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-01-431-7377
NSN 6610-01-659-0340
NSN 6610-00-264-0961
NSN 5920-01-240-2362
NSN 6135-00-284-1406
NSN 5960-00-280-8629
NSN 6685-00-553-8733
NSN 6130-01-425-9870
NSN 5905-01-342-8898
NSN 5920-01-513-9340
NSN 6110-01-371-3477
NSN 6110-01-579-4480