Second end w/groove located 1.573 in. From end, 0.029 in. Wide, 0.230 in. Diameter
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5996-00-142-9033
NSN 5920-01-470-0031
NSN 5965-00-468-3071
NSN 5996-00-186-8709
NSN 5996-01-377-8219
NSN 6620-01-248-0358
NSN 5975-01-481-9842
NSN 5895-01-328-8703
NSN 5895-01-220-9517
NSN 5915-01-442-8469
NSN 5915-00-356-2464
NSN 6620-00-149-7557