Main surface has 2 each 0.120 inch diameter through holes located centeredat 1.300 inches apart and 0.387 inchesfrom front edge; legs have one through hole each of 0.095 inch diameter located 0.145 inches from bottom edge and 0.093 inches from rear edge; legs also havetwo additional holes each, counterbored at 90 degrees located at 0.338 inches from back and bottom edges
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also bracket, angle and bracket (1), mounting.
NSN 5935-01-391-7493
NSN 5945-00-998-7462
NSN 7035-01-372-5006
NSN 5915-01-534-7614
NSN 6145-00-269-4271
NSN 5998-01-378-4246
NSN 5910-01-433-4616
NSN 5930-01-123-7900
NSN 4140-00-200-9082
NSN 5950-00-538-1942
NSN 4140-01-504-7221
NSN 5985-01-377-5264