One hole, 0.094 in. Diameter located 0.125 in. From end of nut
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes nut (1), plain, cap. See also turnbuckle body.
Classification: Nuts of iron or steel
NSN 6610-00-448-1264
NSN 5998-00-308-4297
NSN 5935-00-280-3116
NSN 5935-00-508-7097
NSN 5930-01-345-8654
NSN 6610-00-890-9099
NSN 5835-01-512-4834
NSN 6130-01-458-1282
NSN 6610-00-489-9730
NSN 5945-01-056-5035
NSN 2925-01-495-0586
NSN 6145-01-495-0668