No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Cotters, cotter-pins, washers and similar articles, of aluminum
NSN 5996-01-415-3291
NSN 6685-01-203-7372
NSN 5975-01-544-8112
NSN 6645-00-778-8719
NSN 5930-00-136-8427
NSN 5996-01-266-7008
NSN 4140-01-080-1881
NSN 6110-00-995-8743
NSN 5910-01-225-8233
NSN 5965-01-144-3001
NSN 2925-01-437-9041
NSN 5910-01-648-9555