Two oval shaped holes, 0.853 in. Lg by 0.228 in. Wide
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 6220-00-245-1801
NSN 5960-01-071-6267
NSN 6110-01-294-2676
NSN 6145-01-302-4124
NSN 5925-00-190-0095
NSN 6135-01-599-7563
NSN 5925-01-398-8244
NSN 6645-01-548-3934
NSN 4140-01-181-3213
NSN 6645-00-960-6594
NSN 5905-00-222-5051
NSN 5915-00-688-7699