No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6110-00-587-5241
NSN 5996-01-055-1039
NSN 5985-00-406-6311
NSN 6320-01-470-6826
NSN 5915-01-222-0879
NSN 6105-01-222-5519
NSN 6145-01-465-7682
NSN 5910-01-139-5085
NSN 7035-01-213-5590
NSN 6620-01-445-1409
NSN 5999-00-707-6083
NSN 6620-00-491-3818