Both ends chamfered 0.010 in. By 45 degrees porm 5 deg
No other part numbers with same form, fit, and function found.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6685-01-124-4362
NSN 6320-00-977-3930
NSN 6240-01-067-6457
NSN 6145-01-423-0382
NSN 5945-00-529-6058
NSN 5960-01-062-4087
NSN 5990-00-665-4105
NSN 5975-00-056-8600
NSN 7035-01-192-9989
NSN 5990-00-491-1338
NSN 5925-01-273-0711
NSN 5895-00-057-7827