No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 4140-01-221-1383
NSN 6145-00-263-1855
NSN 5925-00-223-9552
NSN 6240-00-297-3919
NSN 5905-00-991-8855
NSN 5920-00-689-1533
NSN 6685-00-490-5364
NSN 5910-00-520-4577
NSN 6145-01-105-4583
NSN 5950-01-088-8881
NSN 6650-01-519-3818
NSN 7035-01-125-7357