0.1090 in. W by 0.0510 in. Max deep by 0.1460 in. Lg anti-rotational slot on right side
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 5965-00-393-1294
NSN 2925-01-633-4048
NSN 6130-00-901-7855
NSN 7035-01-369-1445
NSN 5855-00-156-5489
NSN 6145-01-323-8813
NSN 5960-01-321-2750
NSN 6110-00-218-0967
NSN 5945-01-601-5475
NSN 5990-01-370-7119
NSN 6130-01-409-2867
NSN 5965-00-977-5658