A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Copper washers including spring washers not threaded
NSN 4140-00-519-2781
NSN 5905-00-702-2990
NSN 5945-01-371-9101
NSN 5935-00-756-3949
NSN 6105-01-174-9582
NSN 6105-01-196-3511
NSN 4140-01-646-1853
NSN 6105-01-089-1325
NSN 5905-00-047-4537
NSN 5935-01-426-8312
NSN 5965-00-111-2073
NSN 6110-00-126-8402