Support on first end located 0.125 in. From end, 1.000 in. Lg x 0.250 in. W x 2.000 in. Ht; 2 holes-0.125 and 0.6562 located 0.450 in. Ctr to ctr
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6620-00-997-6791
NSN 6320-01-481-7322
NSN 6620-01-160-0439
NSN 5910-00-228-6125
NSN 5930-00-432-6047
NSN 5905-01-262-0854
NSN 5998-00-104-0554
NSN 5999-01-490-5835
NSN 5975-00-915-3373
NSN 6220-01-115-6735
NSN 5960-00-229-5121
NSN 5895-00-807-1521