Cylinder no. 1-5360-2 stage telescopic for used on lift truck no.17g130043-1
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5905-01-134-5241
NSN 5935-00-499-9070
NSN 6610-01-456-9872
NSN 5975-01-566-2236
NSN 6645-01-560-9339
NSN 6130-01-204-7778
NSN 6220-00-187-8569
NSN 6610-00-170-6715
NSN 6685-01-470-3056
NSN 6320-01-114-6054
NSN 6130-01-653-8053
NSN 6620-01-373-4588