No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6145-01-464-3380
NSN 6105-00-113-9364
NSN 6610-00-679-4835
NSN 5975-01-013-9247
NSN 5910-00-629-8345
NSN 5990-00-318-3990
NSN 4140-01-411-5908
NSN 5910-01-180-8229
NSN 6620-00-972-3247
NSN 6320-00-646-3311
NSN 5935-00-468-4401
NSN 6110-00-445-2336