No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 2925-01-430-4206
NSN 6645-01-528-8424
NSN 5965-01-456-6622
NSN 5960-00-361-8409
NSN 5975-01-498-7297
NSN 6130-00-106-9708
NSN 4140-00-343-2121
NSN 6685-01-269-2991
NSN 6220-00-413-6589
NSN 5905-00-642-8130
NSN 5945-01-416-8131
NSN 6240-01-198-7929