No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6150-01-442-6514
NSN 5950-01-411-6227
NSN 5920-00-789-8247
NSN 5925-00-778-9033
NSN 6685-01-229-6887
NSN 6320-01-436-0513
NSN 5945-01-582-0603
NSN 5975-01-386-4457
NSN 6685-00-361-0332
NSN 6240-01-020-9910
NSN 5985-01-522-7052
NSN 5930-01-323-2982