A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Articles of plastics & articles of other materials of heading 3901 to 3914, nesoi
NSN 6620-00-564-9412
NSN 5965-00-082-8987
NSN 5965-01-093-0642
NSN 5895-01-258-0484
NSN 6135-01-054-2462
NSN 6145-00-807-3441
NSN 5965-00-630-7872
NSN 6130-00-919-5653
NSN 5905-01-106-1878
NSN 6150-00-515-0764
NSN 5925-01-206-9991
NSN 6145-01-581-6020