A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 2925-00-519-5292
NSN 5998-01-250-9819
NSN 5905-01-432-1157
NSN 5835-00-180-7555
NSN 6645-01-406-0688
NSN 5999-01-285-3797
NSN 6610-01-077-0601
NSN 5930-00-936-8859
NSN 5999-01-105-1668
NSN 5950-00-063-7669
NSN 5999-01-605-1592
NSN 6240-01-565-8176