A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5915-01-022-5112
NSN 5895-01-618-4918
NSN 5985-01-360-5617
NSN 5985-00-470-4260
NSN 6650-00-300-9895
NSN 6320-00-194-4252
NSN 5895-00-088-6024
NSN 5920-01-623-3145
NSN 6240-01-299-2335
NSN 6130-01-442-6491
NSN 5930-01-503-8722
NSN 6130-01-025-6770