No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6650-00-122-1109
NSN 6105-01-328-6473
NSN 5950-01-069-0733
NSN 5950-00-243-3076
NSN 6130-01-095-8236
NSN 6240-01-396-4779
NSN 5975-00-959-3606
NSN 6685-01-392-6900
NSN 5985-01-051-9247
NSN 5965-01-630-0409
NSN 6150-01-400-4211
NSN 5915-00-757-9875