Part name assigned by the commerical organization controlling agency is washer, plain, m6; 6 units per assembly
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6320-00-886-9771
NSN 6150-01-455-1170
NSN 4140-01-156-0445
NSN 5999-00-394-7191
NSN 5895-01-171-0974
NSN 5950-01-556-1635
NSN 5975-01-081-6836
NSN 6105-01-429-9549
NSN 2925-00-134-4827
NSN 6645-01-046-2804
NSN 5895-01-352-9469
NSN 5945-01-068-0385