A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6685-01-171-5120
NSN 6685-01-021-2599
NSN 5930-01-034-5619
NSN 5965-01-504-1799
NSN 5905-01-192-4308
NSN 5999-00-449-7039
NSN 5996-01-180-5834
NSN 5965-01-535-0718
NSN 5975-00-828-9556
NSN 6145-00-412-1292
NSN 5895-01-647-0644
NSN 6650-00-918-4156