A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Articles of plastics & articles of other materials of heading 3901 to 3914, nesoi
NSN 5960-01-109-3342
NSN 6620-00-155-2608
NSN 5999-00-333-1150
NSN 6620-01-172-6960
NSN 5945-00-089-8865
NSN 6130-01-461-4466
NSN 5965-01-415-6351
NSN 5920-01-335-5118
NSN 5910-00-138-9746
NSN 6645-01-365-8020
NSN 5930-01-570-0431
NSN 5835-01-580-0446