1/16 in. By 45 degrees chamfer both sides of id
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6320-01-622-5493
NSN 5960-01-512-0233
NSN 5925-01-523-4244
NSN 6220-01-175-5518
NSN 5999-00-132-5586
NSN 5925-01-625-9785
NSN 5930-01-251-2200
NSN 7035-01-474-6127
NSN 5835-01-485-0210
NSN 6150-00-960-3256
NSN 6220-01-627-3113
NSN 5990-01-544-4360