1/16 in. By 45 degrees chamfer both sides of id
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5925-01-481-0032
NSN 5915-01-642-5294
NSN 5905-01-500-8060
NSN 6145-01-407-0289
NSN 5998-01-351-1873
NSN 6685-00-196-0304
NSN 6105-01-150-6107
NSN 5990-01-443-2931
NSN 5930-00-088-1351
NSN 6105-01-368-7054
NSN 6105-01-065-3545
NSN 6620-00-924-4369