No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6645-00-936-9111
NSN 6685-01-121-8428
NSN 5960-00-212-6367
NSN 5855-00-610-4052
NSN 5996-00-067-8864
NSN 5945-01-029-2200
NSN 6150-00-899-0013
NSN 5905-01-134-0109
NSN 6610-00-495-4918
NSN 5998-01-449-1516
NSN 5915-01-529-9418
NSN 6130-01-411-1678