No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5945-01-557-9540
NSN 6145-01-098-0125
NSN 6645-01-493-8632
NSN 7035-00-870-0290
NSN 7035-01-019-5729
NSN 5905-00-563-0965
NSN 6130-00-019-3032
NSN 5855-01-461-2741
NSN 6240-00-781-8372
NSN 5990-00-809-0088
NSN 5990-01-293-4817
NSN 6135-01-411-3212