46.0 degrees opening; holes are unequally spaced
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5930-01-180-7545
NSN 5855-01-292-5639
NSN 5999-00-926-3241
NSN 6110-01-050-8119
NSN 6620-01-332-3494
NSN 5925-00-255-2048
NSN 5996-00-518-0460
NSN 6220-01-025-1373
NSN 5835-01-346-9575
NSN 6650-01-129-8343
NSN 6240-00-968-9274
NSN 5925-01-024-4838