Three cutouts equally spaced
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5910-01-460-3912
NSN 6610-01-010-3159
NSN 5935-00-135-3932
NSN 6135-00-708-0892
NSN 5996-01-415-3098
NSN 2925-01-027-1293
NSN 6240-01-604-6780
NSN 6610-01-370-3886
NSN 6130-01-495-0238
NSN 7035-00-111-4389
NSN 6220-01-193-9884
NSN 5910-00-312-6621