No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6645-01-331-5674
NSN 6150-00-281-3447
NSN 5935-01-588-9320
NSN 6240-00-092-3186
NSN 6610-01-323-7045
NSN 5945-01-421-0777
NSN 5998-01-228-2618
NSN 5925-01-259-5198
NSN 6240-00-157-1705
NSN 6685-00-435-4023
NSN 6145-01-044-5278
NSN 5965-01-436-0390