A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Greece Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 5910-01-517-1237
NSN 5905-01-561-5936
NSN 6645-01-360-0293
NSN 6320-01-459-6992
NSN 5950-01-338-1089
NSN 5998-01-067-8154
NSN 5935-01-079-1114
NSN 5920-01-124-9623
NSN 5965-01-024-7960
NSN 6135-00-715-4001
NSN 5910-01-244-0343
NSN 5950-01-561-7346