No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6110-00-100-4775
NSN 5950-00-350-2825
NSN 5910-01-292-3724
NSN 6240-00-702-9068
NSN 5965-01-341-8746
NSN 6130-00-315-1181
NSN 6220-01-384-2827
NSN 6320-00-445-1187
NSN 4140-00-189-0235
NSN 6130-00-596-9565
NSN 4140-00-529-0844
NSN 5996-00-857-3077